| Machining Type |
Suggested starting rates are: |
| Single Point turning : |
Roughing - 0.15" depth, 0.015"/rev feed -175 SFM
Finishing - 0.025" depth, 0.007"/rev feed - 200 SFM |
| Drilling : |
1/4" Dia hole - 0.004"/rev feed - 60 SFM
1/2" Dia hole - 0.007"/rev feed - 60 SFM
3/4" Dia hole - 0.010"/rev feed - 60 SFM |
| Reaming : |
Feed - same as drilling - 100 SFM |
| Side and Slot Milling : |
Roughing - 0.25" depth - 0.007"/tooth feed - 125SFM
Finishing - 0.050" depth - 0.009"/tooth feed - 140SFM |
These rates are for carbide tools,
Type C-2 for roughing, drilling and reaming.
Type C-3 for finishing. |